Shower room cleaning and maintenance skills and maintenance precautions

Update:23-09-2022

Summary:1. Cleaning and maintenance of shower room (1) When cleaning...

1. Cleaning and maintenance of shower room

(1) When cleaning the four walls and chassis of the shower room, please use a soft dry cloth. If there is slight dirt, please use a soft dry cloth.

Use a cloth or sponge to clean with a neutral detergent, and use alcohol to remove stubborn stains.

(2) When using the bathroom special detergent, be sure to use it correctly according to the precautions on its container. wrong make

The method of use will have adverse effects on people, and it is easy to cause some undesirable situations in the product.

(3) Do not use the following items for cleaning: acid, alkaline solvents, medicines (such as hydrochloric acid), solvents such as propionic acid diluent, decontamination powder, etc., otherwise, it will have adverse effects on the human body and cause some defects in the product situation.

2. How to use and maintain the pulley of the shower room

1. There are two types of push-pull shower room: sliding block and sliding wheel.

2. Problems that should be paid attention to in the use of pulleys and sliders.

(1) Avoid reloading the sliding door with force below, so as not to cause the sliding door to fall off;

(2) Pay attention to regularly clean the pulleys and sliders, and add lubricant (lubricant or slip wax;

(3) Regularly adjust the adjusting screw of the slider to ensure the effective bearing and good sliding of the slider to the movable door.

3. Maintenance of tempered glass

(1) Do not hit or hit the glass surface with sharp objects to avoid damage.

(2) Do not wipe the glass surface with corrosive liquid, so as not to damage the surface gloss.

(3) Do not wipe the glass surface with rough materials to avoid scratches.

4. Aluminum alloy frame maintenance

(1) Electrostatic powder spray products (such as white, patina, yellow, red, purple and other solid spray products) are first to prevent

Direct sunlight and exposure, because the resin material and the color base powder will have a photosensitive reaction, causing the spray layer to fade; secondly

Can not be wiped with corrosive liquids or materials; the third is not to use rough materials (including toothpaste) to wipe the surface

Fourth, do not use sharp objects to describe the surface, such as aluminum stains, please use a neutral detergent to dissolve in water and wipe it.

(2) Oxidation coloring products (surface coloring such as gold, silver, matte silver, wire drawing, etc.);

For electrospray products, it is not easy to fade, but its hardness is poor, and the surface cannot be painted with sharp objects. If aluminum

If there are stains on the surface, please wipe it with a neutral detergent and water.